TRANSP Grid Analysis 14593A31 ST40 tr.tail
%xjaset-- too many orbit intercepts found; jdep= 15 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 19 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 16 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts, recovery attempt
%xjaset-- too many orbit intercepts, recovery attempt
%xjaset-- too many orbit intercepts found; jdep= 18 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts, recovery attempt
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 14 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts, recovery attempt
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 14 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts, recovery attempt
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts, recovery attempt
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 19 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts, recovery attempt
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 18 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts, recovery attempt
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 13 ...intercept(s) at inside major radius ignored!
%depall specie #1 -> 2608 - 0 (killed) + 216 (dep) = 2824 ptcls.
depall exited 0
orball...
depall exited 0
orball...
depall exited 0
orball...
depall exited 0
orball...
orball exited 0
orball exited 0
orball exited 0
orball exited 0
==> exiting nubeam_step_child, mpi myidd = 2
==> exiting nubeam_step_child, mpi myidd = 3
==> exiting nubeam_step_child, mpi myidd = 1
nbfinish...
entering outptb2
exited outptb2
entering nbo_load
exit nbo_load
exit nbfinish...
==> exiting nubeam_step_child, mpi myidd = 0
nubeam_load_state...
nubeam_step: levmod_halo= 0
trmpi_listener: service request "EXIT" on cpu# 2
trmpi_listener: service request "EXIT" on cpu# 3
trmpi_listener: service request "EXIT" on cpu# 1
Note: The following floating-point exceptions are signalling: IEEE_UNDERFLOW_FLAG IEEE_DENORMAL
Note: The following floating-point exceptions are signalling: IEEE_UNDERFLOW_FLAG IEEE_DENORMAL
Note: The following floating-point exceptions are signalling: IEEE_UNDERFLOW_FLAG IEEE_DENORMAL
Note: The following floating-point exceptions are signalling: IEEE_DENORMAL
==>runtrx_r9: TRANSP run successful
==========(runtrx_r9)======================
==========TRANSP output conversion======
date: Wed Apr 1 11:27:04 AM EDT 2026 ( flux-node10.local )
==========(runtrx_r9)====runsite=pppl.gov=================
srart tr_finish_mpi.pl false pppl.gov 14593A31 ST40
---------------> starting: plotcon 14593A31 2026/04/01:11:27:04
%initcpl: MDS_CACHE enabled.
%PoPlot -- reading .PLN files
%POPLT2-- PROCESSING RUN 14593A31 SHOT NO. 14593
EXPECT 571 SCALAR FCNS, 1131 PROFILE FCNS OF TIME
"MF" FILE RECORD SIZE = 20 WORDS (FLOATING PT)
dmg_datbuf_expand call from dmgini_sized: isize= 0
14593A31MF.PLN size = 5.2M
%initcpl: MDS_CACHE enabled.
[mds_cache_disable: MDS+ cache disabled.]
dmg_datbuf_expand call from dmgini_sized: isize= 0
(retry folding filename to lowercase)
...reading TF.PLN header data...
cdfcon: NETcdf file datestamp : Wed Apr 1 11:27:06 2026
build_date: call getenv
build_date: call ufopen xshare_build.dat
cdfcon: Transp common build date : Fri May 3 15:19:16 EDT
Define Dimensions 11
define Scalar Fct 571
Define Multi Graphs 452
Write Profiles 1131
X 1 1 20
XB 2 2 20
THETA 3 7 80
RMJSYM 4 32 85
RMAJM 5 34 41
MCINDX 6 35 220
ILIM 7 37 150
RGRID 8 990 101
ZGRID 9 991 161
PSIRZ 10 992 16261
%dmgxot_spredm: non-monotonic X axis:
#increasing steps: 21134 avg & max steps: 7.8813E-04 2.1521E-03
#decreasing steps: 31964 avg & max steps: 5.2109E-04 1.0801E-03
#zero steps: 158282
B_FIELD 11 993 48783
%dmgxot_spredm: non-monotonic X axis:
#increasing steps: 59389 avg & max steps: 1.2214E-01 3.8012E+00
#decreasing steps: 305891 avg & max steps: 2.3711E-02 6.0019E-01
#zero steps: 268886
read NF File : 572 571
Write Multigraph: 452
...readback test of .CDF file...
2156 variables, 13 dimensions 15 att
...header check SUCCESSFUL; now check data.
...check profile data...
plotcon: CDF files in /scratch/shared/tr_kaye/transp_compute/ST40/14593A31
/scratch/shared/tr_kaye/transp_compute/ST40/14593A31/14593A31.CDF
/scratch/shared/tr_kaye/transp_compute/ST40/14593A31/14593A31PH.CDF
%targz_pseq: no directory: 14593A31_replay (normal exit)
%targz_solv: in /scratch/shared/tr_kaye/transp_compute/ST40/14593A31 on host flux-node10
%targz_solv: no TGLF debug info found (normal exit)
%targz_solv: no TGLF debug info found (normal exit)
--------------->plotcon: normal exit. 2026/04/01:11:27:06
==>runtrx_r9: TRANSP postprocessing OK
==========(runtrx_r9)======================
==========TRANSP add to MDSplus ========
date: Wed Apr 1 11:27:06 AM EDT 2026 ( flux-node10.local )
==========(runtrx_r9)======================
%mdsplot: call INITPL
%initcpl: MDS_CACHE enabled.
%mdsplot: call getenv
%mdsplot: call ufopen xshare_build.dat
%mdsplot: MDSplus controls cleared, server set to local.
mds_conopn: option = 4 145930131 TRANSP_ST40
...connecting to server: TRANSPGRID.PPPL.GOV
...tcl("EDIT TRANSP_ST40/SHOT=145930131")
dmg_datbuf_expand call from dmgini_sized: isize= 0
... reading NetCDF header data ...
cdfhrd: size(time) = 2048
cdfhrd: size(time3) = 2048
MDS 1D Put OK
MDS 2D Put OK
MDS MG Put OK
?mds_add_node: already there NB_NAMELIST
open 14593A31_nubeam_init.dat
add_file: 161 lines - 132
delete node .TRDATA
tcl("write")
...mdsplot: normal exit.
==========(runtrx_r9)======================
==========TRANSP finish and cleanup=====
date: Wed Apr 1 11:27:48 AM EDT 2026 ( flux-node10.local )
==========(runtrx_r9)======================
%finishup -I- pppl.gov production run
%finishup: copying TRANSP permanent output files to /u/tr_kaye/transp/result/ST40.25
acsort.py: No match.
mv 14593A31.CDF /u/tr_kaye/transp/result/ST40.25/14593A31.CDF
mv 14593A31ex.for /u/tr_kaye/transp/result/ST40.25/14593A31ex.for
mv 14593A31_nubeam_init.dat /u/tr_kaye/transp/result/ST40.25/14593A31_nubeam_init.dat
mv 14593A31PH.CDF /u/tr_kaye/transp/result/ST40.25/14593A31PH.CDF
mv 14593A31TR.DAT /u/tr_kaye/transp/result/ST40.25/14593A31TR.DAT
mv 14593A31TR.INF /u/tr_kaye/transp/result/ST40.25/14593A31TR.INF
%finishup: retaining 14593A31tr.log
mv 14593A31TR.MSG /u/tr_kaye/transp/result/ST40.25/14593A31TR.MSG
mv 14593A31.yml /u/tr_kaye/transp/result/ST40.25/14593A31.yml
rm: No match.
%finishup -I- both the GRID and the PPPL flags are set.
/p/transpgrid/lqshare/14593A31_ST40.qarc status 0
==========(runtrx_r9)======================
==========>runtrx_r9 normal exit<==========
date: Wed Apr 1 11:27:51 AM EDT 2026 ( flux-node10.local )
==========>runtrx_r9 runsite = pppl.gov <======