TRANSP Grid Analysis 14596A33 ST40 tr.tail
%xjaset-- too many orbit intercepts found; jdep= 19 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts, recovery attempt
%xjaset-- too many orbit intercepts found; jdep= 16 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 16 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts, recovery attempt
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts, recovery attempt
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 15 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 16 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 16 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 18 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 13 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 13 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 19 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 15 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 15 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 18 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 19 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 13 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 13 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts, recovery attempt
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 19 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts, recovery attempt
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 15 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 21 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 14 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 20 ...intercept(s) at inside major radius ignored!
%depall specie #1 -> 2716 - 0 (killed) + 167 (dep) = 2883 ptcls.
depall exited 0
orball...
depall exited 0
orball...
depall exited 0
orball...
depall exited 0
orball...
%xjaset-- too many orbit intercepts found; jdep= 4 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 12 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 3 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 9 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts found; jdep= 7 ...intercept(s) at inside major radius ignored!
%xjaset-- too many orbit intercepts, recovery attempt
orball exited 0
orball exited 0
orball exited 0
orball exited 0
==> exiting nubeam_step_child, mpi myidd = 2
==> exiting nubeam_step_child, mpi myidd = 3
nbfinish...
entering outptb2
==> exiting nubeam_step_child, mpi myidd = 1
exited outptb2
entering nbo_load
exit nbo_load
exit nbfinish...
==> exiting nubeam_step_child, mpi myidd = 0
nubeam_load_state...
nubeam_step: levmod_halo= 0
trmpi_listener: service request "EXIT" on cpu# 2
trmpi_listener: service request "EXIT" on cpu# 1
trmpi_listener: service request "EXIT" on cpu# 3
Note: The following floating-point exceptions are signalling: IEEE_UNDERFLOW_FLAG IEEE_DENORMAL
Note: The following floating-point exceptions are signalling: IEEE_UNDERFLOW_FLAG IEEE_DENORMAL
Note: The following floating-point exceptions are signalling: IEEE_UNDERFLOW_FLAG IEEE_DENORMAL
Note: The following floating-point exceptions are signalling: IEEE_DENORMAL
==>runtrx_r9: TRANSP run successful
==========(runtrx_r9)======================
==========TRANSP output conversion======
date: Thu Apr 2 11:24:57 AM EDT 2026 ( flux-node01.local )
==========(runtrx_r9)====runsite=pppl.gov=================
srart tr_finish_mpi.pl false pppl.gov 14596A33 ST40
---------------> starting: plotcon 14596A33 2026/04/02:11:24:57
%initcpl: MDS_CACHE enabled.
%PoPlot -- reading .PLN files
%POPLT2-- PROCESSING RUN 14596A33 SHOT NO. 14596
EXPECT 571 SCALAR FCNS, 1131 PROFILE FCNS OF TIME
"MF" FILE RECORD SIZE = 20 WORDS (FLOATING PT)
dmg_datbuf_expand call from dmgini_sized: isize= 0
14596A33MF.PLN size = 4.1M
%initcpl: MDS_CACHE enabled.
[mds_cache_disable: MDS+ cache disabled.]
dmg_datbuf_expand call from dmgini_sized: isize= 0
(retry folding filename to lowercase)
...reading TF.PLN header data...
cdfcon: NETcdf file datestamp : Thu Apr 2 11:24:58 2026
build_date: call getenv
build_date: call ufopen xshare_build.dat
cdfcon: Transp common build date : Fri May 3 15:19:16 EDT
Define Dimensions 11
define Scalar Fct 571
Define Multi Graphs 452
Write Profiles 1131
X 1 1 20
XB 2 2 20
THETA 3 7 80
RMJSYM 4 32 85
RMAJM 5 34 41
MCINDX 6 35 220
ILIM 7 37 150
RGRID 8 990 101
ZGRID 9 991 161
PSIRZ 10 992 16261
%dmgxot_spredm: non-monotonic X axis:
#increasing steps: 17708 avg & max steps: 7.7628E-04 2.1006E-03
#decreasing steps: 26749 avg & max steps: 5.1390E-04 1.0702E-03
#zero steps: 134403
B_FIELD 11 993 48783
%dmgxot_spredm: non-monotonic X axis:
#increasing steps: 51563 avg & max steps: 9.6845E-02 3.0301E+00
#decreasing steps: 256609 avg & max steps: 1.9460E-02 4.7844E-01
#zero steps: 228430
read NF File : 572 571
Write Multigraph: 452
...readback test of .CDF file...
2156 variables, 13 dimensions 15 att
...header check SUCCESSFUL; now check data.
...check profile data...
plotcon: CDF files in /scratch/shared/tr_kaye/transp_compute/ST40/14596A33
/scratch/shared/tr_kaye/transp_compute/ST40/14596A33/14596A33.CDF
/scratch/shared/tr_kaye/transp_compute/ST40/14596A33/14596A33PH.CDF
%targz_pseq: no directory: 14596A33_replay (normal exit)
%targz_solv: in /scratch/shared/tr_kaye/transp_compute/ST40/14596A33 on host flux-node01
%targz_solv: no TGLF debug info found (normal exit)
%targz_solv: no TGLF debug info found (normal exit)
--------------->plotcon: normal exit. 2026/04/02:11:24:58
==>runtrx_r9: TRANSP postprocessing OK
==========(runtrx_r9)======================
==========TRANSP add to MDSplus ========
date: Thu Apr 2 11:24:58 AM EDT 2026 ( flux-node01.local )
==========(runtrx_r9)======================
%mdsplot: call INITPL
%initcpl: MDS_CACHE enabled.
%mdsplot: call getenv
%mdsplot: call ufopen xshare_build.dat
%mdsplot: MDSplus controls cleared, server set to local.
mds_conopn: option = 4 145960133 TRANSP_ST40
...connecting to server: TRANSPGRID.PPPL.GOV
...tcl("EDIT TRANSP_ST40/SHOT=145960133")
dmg_datbuf_expand call from dmgini_sized: isize= 0
... reading NetCDF header data ...
cdfhrd: size(time) = 2048
cdfhrd: size(time3) = 2048
MDS 1D Put OK
MDS 2D Put OK
MDS MG Put OK
?mds_add_node: already there NB_NAMELIST
open 14596A33_nubeam_init.dat
add_file: 161 lines - 132
delete node .TRDATA
tcl("write")
...mdsplot: normal exit.
==========(runtrx_r9)======================
==========TRANSP finish and cleanup=====
date: Thu Apr 2 11:25:34 AM EDT 2026 ( flux-node01.local )
==========(runtrx_r9)======================
%finishup -I- pppl.gov production run
%finishup: copying TRANSP permanent output files to /u/tr_kaye/transp/result/ST40.25
acsort.py: No match.
mv 14596A33.CDF /u/tr_kaye/transp/result/ST40.25/14596A33.CDF
mv 14596A33ex.for /u/tr_kaye/transp/result/ST40.25/14596A33ex.for
mv 14596A33_nubeam_init.dat /u/tr_kaye/transp/result/ST40.25/14596A33_nubeam_init.dat
mv 14596A33PH.CDF /u/tr_kaye/transp/result/ST40.25/14596A33PH.CDF
mv 14596A33TR.DAT /u/tr_kaye/transp/result/ST40.25/14596A33TR.DAT
mv 14596A33TR.INF /u/tr_kaye/transp/result/ST40.25/14596A33TR.INF
%finishup: retaining 14596A33tr.log
mv 14596A33TR.MSG /u/tr_kaye/transp/result/ST40.25/14596A33TR.MSG
mv 14596A33.yml /u/tr_kaye/transp/result/ST40.25/14596A33.yml
rm: No match.
%finishup -I- both the GRID and the PPPL flags are set.
/p/transpgrid/lqshare/14596A33_ST40.qarc status 0
==========(runtrx_r9)======================
==========>runtrx_r9 normal exit<==========
date: Thu Apr 2 11:25:37 AM EDT 2026 ( flux-node01.local )
==========>runtrx_r9 runsite = pppl.gov <======