TRANSP Grid Analysis 36759D02 KSTR tr.tail

 %INITAL:  pseudo time advanced to  4.419842E+00
 %INITAL:  pseudo time advanced to  4.425802E+00
% MHDEQ: TG1=     4.500000 ; TG2=     4.510000 ; DTG=  1.000E-02

 * MHD EQUILIBRIUM CALCULATED, CPU TIME =  2.5690E-03 SECONDS
   DATA R*BT AT EDGE:  3.4044E+02
 ->EQBDY_CHECK: last flux surface curvature ratio is:  6.3825E-02
  %get_rygrid: no grids for Psi(R,Y)
% MHDEQ: TG1=     4.500000 ; TG2=     4.510000 ; DTG=  1.000E-02

 * MHD EQUILIBRIUM CALCULATED, CPU TIME =  2.5950E-03 SECONDS
   DATA R*BT AT EDGE:  3.4044E+02
 ->EQBDY_CHECK: last flux surface curvature ratio is:  5.9205E-02
  %get_rygrid: no grids for Psi(R,Y)
 *** FULL NEUTRAL SOURCE CALCULATION PERFORMED ***         NSTEP=      0
 TA= 4.42580E+00 CPU TIME= 3.37080E-02 SECONDS.  DT= 7.45058E-03
 %INITAL:  pseudo time advanced to  4.433253E+00
 %INITAL:  pseudo time advanced to  4.442566E+00
% MHDEQ: TG1=     4.500000 ; TG2=     4.510000 ; DTG=  1.000E-02

 * MHD EQUILIBRIUM CALCULATED, CPU TIME =  2.5430E-03 SECONDS
   DATA R*BT AT EDGE:  3.4044E+02
 ->EQBDY_CHECK: last flux surface curvature ratio is:  6.3825E-02
  %get_rygrid: no grids for Psi(R,Y)
% MHDEQ: TG1=     4.500000 ; TG2=     4.510000 ; DTG=  1.000E-02

 * MHD EQUILIBRIUM CALCULATED, CPU TIME =  2.6480E-03 SECONDS
   DATA R*BT AT EDGE:  3.4044E+02
 ->EQBDY_CHECK: last flux surface curvature ratio is:  5.9205E-02
  %get_rygrid: no grids for Psi(R,Y)
 *** FULL NEUTRAL SOURCE CALCULATION PERFORMED ***         NSTEP=      0
 TA= 4.44257E+00 CPU TIME= 3.33910E-02 SECONDS.  DT= 9.90000E-03
 %INITAL:  pseudo time advanced to  4.452466E+00
 %INITAL:  pseudo time advanced to  4.462366E+00
% MHDEQ: TG1=     4.500000 ; TG2=     4.510000 ; DTG=  1.000E-02

 * MHD EQUILIBRIUM CALCULATED, CPU TIME =  2.5390E-03 SECONDS
   DATA R*BT AT EDGE:  3.4044E+02
 ->EQBDY_CHECK: last flux surface curvature ratio is:  6.3825E-02
  %get_rygrid: no grids for Psi(R,Y)
% MHDEQ: TG1=     4.500000 ; TG2=     4.510000 ; DTG=  1.000E-02

 * MHD EQUILIBRIUM CALCULATED, CPU TIME =  2.7110E-03 SECONDS
   DATA R*BT AT EDGE:  3.4044E+02
 ->EQBDY_CHECK: last flux surface curvature ratio is:  5.9205E-02
  %get_rygrid: no grids for Psi(R,Y)
 *** FULL NEUTRAL SOURCE CALCULATION PERFORMED ***         NSTEP=      0
 TA= 4.46237E+00 CPU TIME= 3.35820E-02 SECONDS.  DT= 9.90000E-03
 %INITAL:  pseudo time advanced to  4.472266E+00
 %INITAL:  pseudo time advanced to  4.482166E+00
 %INITAL:  pseudo time advanced to  4.492066E+00
 sce_equil_init:
    Equilibration feature not active (noption_equil <= 0 in namelist).

 cpu time (sec) in nubeam_ctrl_init:   3.9200E-04
  %nubeam_step ++++++++ nltrk_dep0 F
  %nubeam_step ++++++++ nlbout (lost ptcl.) F
  %nubeam_step ++++++++ nbsteps            0
  ==> entering nubeam_step_child, mpi myidd =            0
  nbi_interp_profiles... 
    nbi_getprofiles ne*dvol sum (input): 2.0822E+20
    nbi_getprofiles ne*dvol sum (ions):  2.0822E+20
  nbstart... 
 % nbi_alloc2_init: nbi_alloc2 done
  % nbi_states: fld_states write OK to filename: 36759D02_fi/36759D02_debug_nbi_fld_state.cdf
  ADAS310_INIT: /p/pshare/transp/adas                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           
  %fi_finish: enter
  %fimain: eflux cpu time =    5.9999999999504894E-006
 EC call, timestep(sec):  4.5000E+00  4.5050E+00 total power(Watts):  4.0964E+05
 TORAYMAIN Top: Directory changed to= /scratch/shared/tr_halkhawa/transp_compute/KSTR/36759D02/36759D02_ecrf
  %psiin_write: apply Psi(0) correction to Psi(R,Z)

TORAY calculations for TA=         4.50000

 Running TORAY 1.95 (30 June 2016)
 Reading in namelist from toray.in ... 

 LinLiu ECCD / <B>

 Ray pattern = .gauss.   Number of rays =           30

 running GAFIT version 4.0 (12 July 2012)

 WARNING: Ignoring unrecognized command-line argument "36759D02".
          Only "-trace" and "-verbose" are valid options,
          though they may be abbreviated to two characters.

 reading user-provided GAFIT namelist file

  TorGA_read_psiin:: nr =          129  (          65 )
  TorGA_read_psiin:: nz =          129  (          65 )
 TorGA_complexxp: Index converged only to     0.00002400
 TorGA_complexxp: Index converged only to     0.00055962
 Ray=   1  ISTOP= 7   IFLAG= 2  AT     0.180619E+03    0.766451E+01   -0.834937E+01
 TorGA_complexxp: Index converged only to     0.00001926
 Ray=   2  ISTOP= 7   IFLAG= 2  AT     0.180996E+03    0.899975E+01   -0.842495E+01
 TorGA_complexxp: Index converged only to     0.00007845
 Ray=   3  ISTOP= 7   IFLAG= 2  AT     0.180664E+03    0.798834E+01   -0.977584E+01
 TorGA_complexxp: Index converged only to     0.00013173
 Ray=   4  ISTOP= 7   IFLAG= 2  AT     0.180933E+03    0.641145E+01   -0.937534E+01
 TorGA_complexxp: Index converged only to     0.00023812
 Ray=   5  ISTOP= 7   IFLAG= 2  AT     0.180817E+03    0.654297E+01   -0.755085E+01
 Ray=   6  ISTOP= 7   IFLAG= 2  AT     0.180924E+03    0.815246E+01   -0.696089E+01
 TorGA_complexxp: Index converged only to     0.00001631
 Ray=   7  ISTOP= 7   IFLAG= 2  AT     0.180959E+03    0.959683E+01   -0.591084E+01
 Ray=   8  ISTOP= 7   IFLAG= 2  AT     0.181060E+03    0.103331E+02   -0.726487E+01
 Ray=   9  ISTOP= 7   IFLAG= 2  AT     0.181234E+03    0.103009E+02   -0.892169E+01
 Ray=  10  ISTOP= 7   IFLAG= 2  AT     0.181171E+03    0.960336E+01   -0.103325E+02
 TorGA_complexxp: Index converged only to     0.00012300
 Ray=  11  ISTOP= 7   IFLAG= 2  AT     0.180764E+03    0.844589E+01   -0.111369E+02
 Ray=  12  ISTOP= 7   IFLAG= 2  AT     0.181056E+03    0.694206E+01   -0.114146E+02
 TorGA_complexxp: Index converged only to     0.00020982
 Ray=  13  ISTOP= 7   IFLAG= 2  AT     0.180902E+03    0.567974E+01   -0.108086E+02
 TorGA_complexxp: Index converged only to     0.00091126
 Ray=  14  ISTOP= 7   IFLAG= 2  AT     0.180759E+03    0.490629E+01   -0.956255E+01
 TorGA_complexxp: Index converged only to     0.00005265
 TorGA_complexxp: Index converged only to     0.00050221
 Ray=  15  ISTOP= 7   IFLAG= 2  AT     0.180789E+03    0.483234E+01   -0.800911E+01
 TorGA_complexxp: Index converged only to     0.00001258
 Ray=  16  ISTOP= 7   IFLAG= 2  AT     0.180865E+03    0.551254E+01   -0.651907E+01
 TorGA_complexxp: Index converged only to     0.00020158
 Ray=  17  ISTOP= 7   IFLAG= 2  AT     0.180834E+03    0.679325E+01   -0.546664E+01
 TorGA_complexxp: Index converged only to     0.00002141
 TorGA_complexxp: Index converged only to     0.00060067
 Ray=  18  ISTOP= 7   IFLAG= 2  AT     0.180596E+03    0.835404E+01   -0.511820E+01
 TorGA_complexxp: Index converged only to     0.00007454
 Ray=  19  ISTOP= 7   IFLAG= 2  AT     0.180667E+03    0.990438E+01   -0.279428E+01
 Ray=  20  ISTOP= 7   IFLAG= 2  AT     0.181169E+03    0.117615E+02   -0.477828E+01
 Ray=  21  ISTOP= 7   IFLAG= 2  AT     0.181060E+03    0.125975E+02   -0.740143E+01
 Ray=  22  ISTOP= 7   IFLAG= 2  AT     0.181018E+03    0.120582E+02   -0.101757E+02
 Ray=  23  ISTOP= 7   IFLAG= 2  AT     0.181330E+03    0.102896E+02   -0.124138E+02
 Ray=  24  ISTOP= 7   IFLAG= 2  AT     0.181257E+03    0.795120E+01   -0.134702E+02
 TorGA_complexxp: Index converged only to     0.00005635
 Ray=  25  ISTOP= 7   IFLAG= 2  AT     0.181132E+03    0.551128E+01   -0.132500E+02
 TorGA_complexxp: Index converged only to     0.00002994
 Ray=  26  ISTOP= 7   IFLAG= 2  AT     0.180975E+03    0.356629E+01   -0.117948E+02
 TorGA_complexxp: Index converged only to     0.00010863
 TorGA_complexxp: Index converged only to     0.00146738
 Ray=  27  ISTOP= 7   IFLAG= 2  AT     0.180730E+03    0.264083E+01   -0.934584E+01
 TorGA_complexxp: Index converged only to     0.00002880
 TorGA_complexxp: Index converged only to     0.00089065
 Ray=  28  ISTOP= 7   IFLAG= 2  AT     0.180728E+03    0.302768E+01   -0.652362E+01
 TorGA_complexxp: Index converged only to     0.00004114
 TorGA_complexxp: Index converged only to     0.00004256
 Ray=  29  ISTOP= 7   IFLAG= 2  AT     0.180735E+03    0.470377E+01   -0.403096E+01
 TorGA_complexxp: Index converged only to     0.00004253
 TorGA_complexxp: Index converged only to     0.00280214
 Ray=  30  ISTOP= 7   IFLAG= 2  AT     0.180500E+03    0.727508E+01   -0.250753E+01
 TorGa_wrtnetcdf,  kopt=           1

 TORAY-GA         total CPU time       0.12 sec

  Generic ECH post-processing: ps2trcom_ech... 

  antenna # iant =            1
  powecha_use(iant) =    0.0000000000000000     
  ps_ts2 prof sum =   0.0000000000000000     
  trcom prof sum =    0.0000000000000000     
  ps_ts2 cur sum  =   0.0000000000000000     
  trcom cur sum  =    0.0000000000000000     

  antenna # iant =            2
  powecha_use(iant) =    409637.66307255294     
  ps_ts2 prof sum =   409601.48840893852     
  trcom prof sum =    409601.48840893846     
  ps_ts2 cur sum  =  -3768.5700937263755     
  trcom cur sum  =    3768.5700937263759     

  Total ECH heating:      409601.48840893846     
  Total Current Drive:    3768.5700937263759     
 TORAYMAIN Bottom: Current directory= /scratch/shared/tr_halkhawa/transp_compute/KSTR/36759D02
  %neutrals: BOTH beam halo and recombination sources are present.
 *** FULL NEUTRAL SOURCE CALCULATION PERFORMED ***         NSTEP=      1
 TA= 4.50000E+00 CPU TIME= 4.38940E-02 SECONDS.  DT= 9.90000E-03

 TEC1=    4.5000000000000000     
 TEC2=    4.5049999999999999     
 TECON=    2.7000000476837158     
 TECOFF=    9.2098999023437500     
 fe_outtim(1)=    9.9999999999999995E+033
 fe_outtim(2)=    9.9999999999999995E+033

  %check_save_state: TR_WALLTIME =         1440
  %check_save_state: QSHARE=/p/transpgrid/qshare                                                                                                    
  %check_save_state: nbflag              =  T
  %check_save_state: iwrite_now          =  T
  %check_save_state: check at wall_hours =    2.2086111110866113E-003
  %wrstf: start call wrstf.
  %wrstf: open new restart file:36759D02RS.DAT
  %wrstf: open36759D02RS.DAT_NEW, status=           0
  %wrstf: record, ier=           1  (ier=1, OK)
  %wrstf: psload_save
  %ps_rezone_chk: no rezone operator available (no MHD equilibrium).
  %ps_rezone_chk: no rezone operator available (no MHD equilibrium).
  %ps_rezone_chk: no rezone operator available (no MHD equilibrium).
  %wrstf: write marker file.
  %wrstf: transp_rplot_state_backup

 % RESTART RECORD WRITTEN AT TA=  4.5000000E+00